Electric mini pump Dynamic Turblo 2
Code: DY-183
Product detailed description
Turblo 2
Turblo 2 handles top-ups and reinflation after a puncture. Rubberised buttons can be used with gloves; revised cooling and motor control support repeated inflation.
Features and construction
Display and pressure setting
Set pressure in bar or PSI and monitor the live reading and inflation progress. The sensor stops the motor automatically at the target pressure. A built-in LED illuminates the valve area.
Valves and TPU tubes
Use the supplied black adapter for Presta and white adapter for Schrader. The pump pushes onto the valve without threading. Use the supplied hose with TPU tubes that have plastic valves to reduce heat transfer. Schwalbe Clik Valve requires its own adapter, which is not included.
Inflation per charge
The manufacturer specifies up to five road tyres from flat to 5 bar or eight MTB tyres to 1.5 bar per charge. Actual capacity depends on tyre volume and the required pressure.
Specifications
Valves
Presta / Schrader
Light
built-in LED
Pressure measurement
digital · bar / PSI
How to use
- Hold the power button for 3 seconds, then set pressure with +/−. Double-press − to switch between bar and PSI.
- Fit the correct adapter and connect to the valve; use the hose for TPU tubes with plastic valves.
- Press the power button once to start. The pump stops when the target pressure is reached.
- Disconnect, switch off and allow the pump to cool before storing it.
What is included
Includes the Turblo 2 pump, Presta and Schrader adapters and an extension hose. A Schwalbe Clik Valve adapter is supplied separately.
Additional parameters
| Category: | Cordless compressors |
|---|---|
| Warranty: | 2 years |
| EAN: | 8721325671813 |
Product rating
Be the first who will post an article to this item!
Discussion
Be the first who will post an article to this item!